How to install the differential of MN MODEL MN38 RC CAR?

Click here to buy MN MODEL MN38 RC CAR original parts

MN MODEL MN38 RC CAR Differential Use precision tools to install new ball bearings on the press, ensuring that the bearings are accurately positioned and stable and durable.

Position the odometer drive gear, align it with the positioning hole, and press it in with force and stability. Be careful to use moderate force to avoid damaging the gears or positioning holes.

Install the rubber gasket in the MN MODEL MN38 RC CAR differential case to provide the necessary support for subsequent assembly. Make sure the rubber gasket is positioned correctly and firmly.

Use the operating tool to flip the differential case and install the lower gear in place. Use your hands to gently support the upper gear to ensure that the gears fit well.

Install the planetary gears accurately into the housing, ensuring that the rotating gear set is aligned with the holes. This is a critical step and requires careful operation to avoid damaging the gears or causing inaccurate installation.

Insert the planetary gear shaft and position it firmly in the positioning hole. Keep the overall structure stable to ensure that the differential can work properly.

Install the wire clamp to ensure that all connections are stable. Check that each connection point is firm and reliable to avoid loosening or falling off during use.

Remove all installation tools and carefully check the installation of the MN MODEL MN38 RC CAR differential. Make sure that each part is installed in place and nothing is missing.