MN MODEL MN168 RC CAR is a high-quality remote control car model with excellent drift performance and exquisite appearance design. It uses original parts such as metal gear differential, gyroscope and other advanced technologies to provide players with the ultimate control experience.
You need to purchase the original parts of the MN MODEL MN38 RC CAR (you can click here).
How to install the original parts of MN MODEL MN38 RC CAR?
- Find the installation position of the battery according to the manual, carefully put the battery into the battery compartment, and make sure that the connection between the battery and the battery compartment is firm.
- Find the installation position of the motor, clean the dust and debris at the position, fix the motor in the specified position, and make sure that the fixing screws of the motor are tightened.
- The installation of the suspension system is crucial to the driving stability of MN MODEL MN38 RC CAR. Follow the instructions in the manual and install the various components of the suspension system step by step.
- When installing interior parts, pay attention to details and firmness to ensure that the interior parts do not interfere or rub with other parts of the vehicle.
- Follow the principle of easy first and difficult later, inside first and outside later, and install step by step. During the installation MN MODEL MN38 RC CAR process, pay attention to the fit and fixing method between parts.
What should I pay attention to when installing the original parts of MN MODEL MN38 RC CAR?
- Before installation, make sure that the purchased parts are fully compatible with the model, year and specifications of MN MODEL MN38 RC CAR.
- Give priority to original parts or certified replacement parts to ensure the best performance and reliability. .
- Prepare the corresponding tools, such as screwdrivers, wrenches, pliers, etc., according to the parts to be installed.
- Carefully read and follow the installation manual of MN MODEL MN38 RC CAR or the instructions provided by the manufacturer.
What are the features of the MN MODEL MN38 RC CAR original accessories battery cover?
- The battery cover is one of the important parts of MN MODEL MN38 RC CAR. Its main function is to protect the battery in the battery compartment and prevent the battery from being damaged or falling off during the operation of the vehicle.
- The battery cover is usually made of high-quality plastic or metal to ensure that it is durable and has a certain degree of anti-fall performance.
- The battery cover of MN MODEL MN38 RC CAR is perfectly compatible with the original battery, ensuring that the battery can be stably installed in the battery compartment and provide lasting power support for the vehicle.
What are the characteristics of MN MODEL MN38 RC CAR original spare parts tires?
- MN MODEL MN38 RC CAR Parts tires are usually made of high-quality rubber or plastic materials, which have good wear resistance and grip, ensuring that the vehicle can maintain stable driving performance under various road conditions.
- The design of the tires fully considers the drift performance and handling of the vehicle. The tire surface is equipped with anti-skid patterns to increase friction with the ground and improve the stability and handling of the vehicle.
- MN MODEL MN38 RC CAR’s tires have the characteristics of large steering angles, which enables the vehicle to easily cope with various complex road conditions and drift challenges.
- MN MODEL MN38 RC CAR Parts tires are perfectly matched with the original wheels and suspension system to ensure that the vehicle can maintain stability and handling during driving.
What are the features of MN MODEL MN38 RC CAR original parts housing kit?
- Protection performance: The MN MODEL MN38 RC CAR shell kit can effectively protect the internal parts of the vehicle from damage caused by collision and impact. It adopts sturdy and durable materials and reasonable structural design, which can absorb and disperse the impact force during collision, thereby protecting the overall structure of the vehicle from damage.
- Aesthetics: The MN MODEL MN38 RC CAR Parts shell kit adopts streamlined design and exquisite detail processing, making the vehicle look more fashionable and dynamic. It can not only enhance the appearance of the vehicle, but also increase the recognition and attractiveness of the vehicle.
- Durability: The MN38 RC CAR Parts shell kit is made of high-quality materials and exquisite craftsmanship, with good durability and anti-aging performance. It can withstand the test of long-term use and harsh environment, keeping the appearance and performance of the vehicle consistent.
If you need to purchase this MN MODEL MN38 RC CAR shell, please click here.
MN MODEL MN38 RC CAR Original Parts Battery-SM-Plug Servo Kit-17KG and LED-Light Group Features
- Battery (SM-plug):
MN MODEL MN38 RC CAR is usually equipped with a large-capacity lithium battery, which has the advantages of high energy density, long life and environmental protection. Specifically for the battery of MN MODEL MN38 RC CAR, it may be connected with an SM-plug, which has the characteristics of safety, reliability and easy plugging and unplugging. - Servo Kit (17KG):
The servo kit is one of the important power components of MN MODEL MN38 RC CAR, which is responsible for controlling the steering and driving of the vehicle. The 17KG servo kit means that it has a strong torque output capability and can easily cope with various complex terrains and high-speed driving scenarios. - LED Light Group:
The LED light group of MN MODEL MN38 RC CAR is a perfect combination of its appearance and practicality. The lighting group usually includes headlights, turn signals, brake lights and chassis lights. These lights can not only improve the recognition and aesthetics of the vehicle, but also provide better lighting and warning effects for the driver.
What are the functions of the MN MODEL MN38 RC CAR original accessories brake disc adapter and drift receiver?
MN38 RC CAR Original Parts Brake Disc Adapter
- Strong adaptability:
The brake disc adapter adopts a standard design and is compatible with a variety of brake discs and brake systems, ensuring that MN MODEL MN38 RC CAR can adapt to brake discs of different brands and models to meet the diverse needs of drivers. - Easy installation:
The design of the brake disc adapter takes into account the convenience of installation, and is usually equipped with easy-to-operate installation interfaces and fixtures, allowing drivers to easily complete the installation and replacement of brake discs. - Safe and reliable:
The brake disc adapter is made of high-quality materials with high strength and wear resistance. It can withstand the huge pressure and friction generated during braking, ensuring the stability and safety of the brake system.
MN MODEL MN38 RC CAR Original Parts Drift Receiver
- Fast response speed:
The drift receiver adopts advanced signal processing technology, which can quickly respond to the remote control’s instructions, ensuring that the vehicle can perform drift actions in real time and improve the driver’s control experience. - High control accuracy:
The drift receiver has high-precision control capabilities and can accurately control the drift angle and speed of the vehicle, allowing the driver to more flexibly grasp the drift state of the vehicle and achieve more accurate drift operations. - Good compatibility:
The drift receiver is compatible with a variety of remote controls and drift systems, supports a variety of drift modes and functions, and meets the different needs of drivers. At the same time, it also has automatic calibration and fault detection functions to ensure the stability and reliability of the drift system.
MN MODEL MN38 RC CAR Original Parts Shutdown Plug and Bottom-LED-Light Introduction
MN MODEL MN38 RC CAR Original Parts Shutdown Plug
- Function:
The MN MODEL MN38 Parts shutoff plug can easily control the switch state of the circuit by inserting or unplugging it, thereby controlling the start and stop of the vehicle. This design is not only convenient for the driver to operate, but also helps to disconnect the power supply when the vehicle is not in use, thereby extending the battery life. - Safety performance:
The shutoff plug is made of high-quality materials and processes, with good insulation performance and corrosion resistance, which can ensure that the circuit will not be short-circuited or leaked due to external factors in the disconnected state, thereby ensuring the safety of the driver. - Compatibility:
The shutoff plug of MN MODEL MN38 RC CAR perfectly matches the circuit system of the vehicle, which can ensure the stability and reliability of the circuit. At the same time, it can also be compatible with other original parts, which is convenient for drivers to upgrade and replace.
MN MODEL MN38 RC CAR Original Parts Bottom-LED-Light
- Decorative effect:
The MN MODEL MN38 Original Parts bottom LED light adopts a variety of colors and flashing modes, which can increase the visual effect of the vehicle and make it more eye-catching during driving. This design not only enhances the appearance of the vehicle, but also helps to improve the recognition of the vehicle at night or in low-light environments. - Practical function:
The MN MODEL MN38 Original Parts bottom LED light can also provide lighting and warning for the driver. During driving, the LED light can illuminate the road and obstacles in front of the vehicle, helping the driver to better judge the road conditions and avoid collisions. At the same time, when braking or turning, the LED light can also send out corresponding signals to remind other vehicles and pedestrians to avoid. - Durability:
The MN MODEL MN38 Original Parts bottom LED light adopts high-quality LED light source and heat dissipation system, which can ensure long-term and high-intensity use without damage. At the same time, it is also waterproof and dustproof, and can maintain normal operation in harsh environments.
MN MODEL MN38 RC CAR Original Parts Metal Front and Rear Axles and Metal Rear Bone Dog Axles Introduction
Performance characteristics of metal front and rear axles
- Corrosion resistance:
Metal front and rear axles have good corrosion resistance and can maintain stable performance in humid or harsh environments. - Lightweight design:
On the premise of ensuring strength, the metal front and rear axles adopt a lightweight design, which reduces the overall weight of the vehicle and improves the acceleration performance and handling of the vehicle.
Performance advantages of metal rear bone dog axles
- Durability:
The metal rear bone dog axle has excellent durability and can withstand long-term use and wear, reducing the frequency of maintenance and replacement. - Stability:
The solid metal material and reasonable structural design enable the rear bone dog axle to maintain stable performance during use and provide reliable support for the vehicle.
MN MODEL MN38 RC CAR Original Parts Front and Rear C-Type Seats and Front Up and Down Rocker Arms Introduction
Functions of Front and Rear C-Type Seats
- Provide the driver with a comfortable ride experience, ensuring that they will not feel tired during long-term driving or high-intensity activities.
- Improve the driver’s stability and safety when maneuvering the vehicle through stable support.
Functions of Front Up and Down Rocker Arms
- Transmit the up and down movement of the MN MODEL MN38 RC CAR Parts wheels to the vehicle body, allowing the vehicle to travel smoothly under various road conditions.
- Realize the steering function of the vehicle through the swing of the MN MODEL MN38 RC CAR Parts rocker arm, improving the vehicle’s controllability and flexibility.
MN MODEL MN38 RC CAR Original Parts Rear Upper and Lower Swing Arms and Connecting Rods Introduction
- The MN MODEL MN38 RC CAR Parts rear upper and lower swing arms are key components connecting the vehicle body and rear wheels. They are usually made of metal and have high strength and wear resistance.
- Through stable support, the driver’s stability and safety when maneuvering the vehicle are improved.
MN MODEL MN38 RC CAR Original Parts Differential Gear with Bearing and Spur Gear and Drive Gear Function and Role Introduction
- The main function of the MN MODEL MN38 RC CAR Parts differential gear with bearing is to adjust the speed difference between the left and right wheels, so that the car can maintain stability and control when turning. At the same time, the bearing can also reduce the friction and wear of the differential gear during operation, and improve the efficiency and life of the differential.
- The main function of the spur gear is to transmit torque and speed, and transfer power from one place to another. In MN MODEL MN38 RC CAR, spur gears may be used for connection and transmission between components such as drive shafts and transmission shafts.
- The main function of the drive gear is to transmit power and speed, and transfer the power of the engine to the wheels or other drive components. In MN MODEL MN38 RC CAR, the drive gear may be used to connect the power transmission between the engine and the transmission system.
MN MODEL MN38 RC CAR Original Parts Structure and Function of Ordinary Shock Absorber and 380 Motor
- MN MODEL MN38 RC CAR Parts Ordinary shock absorber is usually composed of shock absorber cylinder, piston, spring and other components. When the vehicle is driving on uneven road, the shock absorber can absorb and disperse the vibration and impact force from the road to ensure the stability and comfort of the vehicle
- MN MODEL MN38 RC CAR Parts 380 motor is usually composed of motor body, brush, commutator, bearing and other components. The motor body is the core component of the motor, which is responsible for converting electrical energy into mechanical energy. Brush and commutator are used to realize the commutation and speed regulation of the motor. Bearing plays a role in supporting and reducing friction to ensure that the motor can run smoothly.
MN MODEL MN38 RC CAR Original Accessories – What are the functions of USB charger and battery?
MN38 RC CAR Original Parts-USB Charger
- Convert electrical energy: Convert the input AC power (such as household electricity) into the DC power required by the remote control car battery.
- Safety protection: The MN MODEL MN38 RC CAR Parts charger usually has overcurrent, overvoltage, short circuit and other protection functions to ensure that the battery or the charger itself will not be damaged during the charging process.
- Charging indication: Display the charging status and charging progress to the user through indicator lights or display screens.
MN MODEL MN38 RC CAR Original Parts Battery
- Storing electrical energy: The MN MODEL MN38 RC CAR Parts battery can store electrical energy and provide the required electrical energy to the remote control car when needed.
- Driving the remote control car: The battery is the power source of the remote control car and can drive the remote control car to perform various actions.
- Providing stable voltage: The MN MODEL MN38 RC CAR Parts battery can provide stable voltage during the discharge process to ensure that the remote control car can work normally.
- Intelligent protection: There is a protection board inside the MN MODEL MN38 RC CAR Parts battery, which can monitor the battery status and prevent abnormal situations such as overcharging and over-discharging, thereby extending the battery life.
You need to purchase original parts for the MN MODEL MN38 RC CAR (click here).
What are the specific functions of the MN MODEL MN38 RC CAR original accessories transmitter and body assembly?
MN38 RC CAR Original Parts Transmitter Control Function
- Forward, backward, left turn, right turn: The buttons or joysticks on the MN MODEL MN38 RC CAR Parts transmitter can be used to control the basic actions of the remote control car such as forward, backward, left turn, and right turn.
- Acceleration and braking: By adjusting the acceleration and braking buttons or joysticks on the transmitter, the speed and braking effect of the remote control car can be controlled.
- Other special functions: Some transmitters also have the MN MODEL MN38 RC CAR Parts function of controlling the remote control car to perform special actions such as drifting and jumping.
MN MODEL MN38 RC CAR Original Parts Body Assembly Suspension System and Steering System
- The MN MODEL MN38 RC CAR Parts suspension system is used to support the body and absorb road vibrations to improve the driving stability and comfort of the remote control car.
- Shock absorbers: The suspension system is usually equipped with shock absorbers to reduce the impact of road vibrations on the body.
- TheMN MODEL MN38 RC CAR Parts steering system is used to control the driving direction of the remote control car, and is usually composed of steering wheel, steering column, steering gear and other components.
- Steering accuracy: The design and manufacturing accuracy of the steering system directly affects the steering accuracy and control performance of the remote control car.
In summary, the design and manufacturing of MN MODEL MN38 RC CAR original parts have been strictly tested and screened to ensure the performance and quality of the remote control car. These parts work together to enable the remote control car to drive stably and safely, with good handling performance and driving comfort.
You need to purchase this MN MODEL MN38 RC CAR (click here).
Be the first to post a comment.